TE-631AM-2 | WELL TEMP SEN 6" 1K NI; WELL INSERTION TEMPERATURE SENSOR;1K OHM NICKEL 6 IN. PROBE | Johnson Controls
Documents and manuals
Johnson Controls TE-631AM-2 Documents
Overview
Details for TE-631AM-2
WELL TEMP SEN 6" 1K NI; WELL INSERTION TEMPERATURE SENSOR;1K OHM NICKEL 6 IN. PROBE
Description
The TE-6300 Temperature Sensor line provides economical solutions for a wide variety of temperature sensing needs, including wall-mount, outdoor-air, duct, strap-mount, well-insertion, duct-averaging, and VAV Modular Assembly (VMA) flangemount duct-probe applications. The TE-6300 line offers both a metal and a plastic enclosure for the most popular models.
Sensors are available in the following types:
- 1k ohm thin-film nickel
- 1k ohm nickel averaging
- 1k ohm thin-film platinum
- 100 ohm platinum equivalent averaging
- 1k ohm platinum equivalent averaging
- 2.2k (2,252) ohm thermistor
- 10k ohm thermistor, Johnson Controls® Type II
Refer to the TE-6300 Series Temperature Sensors Product Bulletin (LIT-216320) for important product application information.
Features and Benefits
Each sensor is packaged with the necessary mounting accessories to maximize ordering and installation ease and to reduce both commissioning time and cost.
- Full Line of Versatile Sensors—Supports all your temperature sensing needs from a single supplier: wall-mount, outdoor-air, duct, duct-averaging, strap-mount, wellinsertion, and flange-mount duct-probe.
- Single Assembly Ordering—Simplifies ordering; provides a complete assembly in one box.
- Models Featuring an Integral National Pipe Thread (NPT) Adaptor—Increase sensor connection strength, which eliminates the need for a special adaptor.
- Models with a Stainless Steel Sensor Probe—Protect the sensor while increasing corrosion resistance.
- Metal Enclosure (TE-63xxE, TE-63xxM, and TE-63xxV Models)—Meets plenum requirements.
- Models Featuring a Retainer for the Sensor Holder—Allow you to lock the sensor holder into the conduit box.
- Brushed Stainless Steel Mounting Plate—Offers a durable, aesthetically pleasing design.
- Low Profile Flush Mount Design (TE-63xxF Models)—Provides a tamperproof installation ideally suited for schools, sporting complexes, retailers, prisons, and more.
All TE-6300 Series Temperature Sensors are two-wire, passive, resistance-output devices
TE-63xxM Models
The TE-63xxM (metal enclosure) models: • come with a corrosion-protected steel enclosure with a 0.88 in. (22 mm) hole for a 1/2 in. (12.7 mm) conduit fitting • include two hex-head self-drilling screws for mounting the duct and duct-averaging models • offer either a direct-mount or 1/2-14 NPT threaded well sensor holder for mounting in TE-6300W Series Thermowells (well models; order the thermowell separately) • provide optional well sensor holders (order separately) to mount duct models in thermowells • meet UL 1995 plenum use requirements • offer optional accessory kit (order separately) to replace plastic hole plug and wiring bushing to meet International Mechanical Code (IMC) requirements
- Thermowell
- 6 in. Probe Length
- 1K Ohm Nickel RTD
Specifications
Item Number | TE-631AM-2 |
Brand | Johnson Controls |
Category | Temperature Sensors |
Section | Thermowells |
SubCategory | Thermowells |
Thermostat Type | Thermostat Guards and Accessories |
Contractor Rewards Program
Learn more about POINTS PLUS Contractor Rewards Program
Already part of the POINTS PLUS Program?
Enter your Contractor ID # in the comment field of your order on Blackhawk Supply