Get Special Pricing!

109020 | Round Damper | 20" Round Motorized Damper | Braeburn

The photo is for representation purposes only and may not be a photo of product being purchased.

Search products similar to 109020

Jump to: Documents Overview Specifications Reviews

Documents and manuals

Braeburn 109020 Documents

Datasheet More Info

Overview

Details for 109020

Round Damper | 20" Round Motorized Damper

Braeburn PO/PC Round Zone Dampers are used to control the volume of air that will be distributed to a zoned area. With three wire installation and a high torque motor, Braeburn zone dampers provide the quality and durability you have come to expect from the value leader in indoor controls.

Quick and Easy Installation Braeburn power open, power close dampers are designed and built to ensure easy installation and years of trouble free use. Each damper is formed from heavy duty steel. Three wire installation with dual LED indicators help round out the features of this high quality damper.

Specifications

Dimensions See dimensional drawing on reverse
Power 24 VAC, 4 VA
Actuator High torque
Indicators Dual LEDs Indicate Open and Closed
Terminals Three Quick Connect Wiring Terminals
Function Use as Zone Damper or Bypass Damper

Product Features and Benefits

Power Open, Power Close Operation
Heavy Duty Galvanized Construction with Precision Rolled Stiffening Ribs
Dual LEDs for Positive Indication of Open to Close
Excellent for Use as a Bypass Damper with a Static Pressure Controller (Braeburn 149020)

Architectural Specifications

The Round Power Open / Power Close Damper shall be Braeburn Series 1090XX where XX indicates damper diameter (05, 06, 07, 08, 09, 10, 12, 14, 16, 18 and 20 inches). The damper shall be powered directly from zone panel 24 VAC damper terminals. A shared common terminal along with power open and power closed terminals shall be provided for damper control. In the event of a power failure, no readjustment shall be required. The PO/PC Damper shall have an inlet end and a crimped fitment on the outlet end to accept mating duct work of the same diameter. The damper shall be constructed of rolled steel with precision bushings and stiffening ribs to increase damper rigidity. A damper position indicator shall be included to display the current damper positioning. The drive motor shall require 3 VA of power at 24 VAC.